!["[New] Clearing Up Tips for Preventing GoPro Haze"](https://www.lifewire.com/thmb/vy2RuD4qojjzfBoHB1Ors1gYZJs=/400x300/filters:no_upscale():max_bytes(150000):strip_icc()/B3-Screenshot-on-iPhone-12-annotated-2035ac618032412aa31fb3d4c644e0c9.jpg)
"[New] Clearing Up Tips for Preventing GoPro Haze"
![](/images/site-logo.png)
Clearing Up: Tips for Preventing GoPro Haze
How to Avoid and Eliminate Fog on GoPro Lens/Housing
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Max Wales
Mar 27, 2024• Proven solutions
Shooting a motion video under the water while diving or during a sporting like surfboarding can be a wonderful experience. Everybody expects to capture some magnificent water videos during adventurous expeditions. However, foggy layers due to the water condensation on the surface of your camera lenses can pose problems and result in poor and hazy picture output. Assorting proper measures, you can easily eliminate these limitations and shoot high-resolution water videos. Here are some effective ways to deal with GoPro fog problems and shoot clear water videos.
Why Does Fog Accumulate on Your GoPro Camera
The GoPro Hero series cameras are fully protected by the waterproof casing. The case does not allow water from outside to penetrate inside and vice versa. This often causes the problem of fogging. If there are traces of moisture/humidity inside the case for some reason and the external temperature is cold, the condition leads to the condensation of the traces of humidity inside the device. This condensed moisture traces accumulate on the lenses forming foggy layer.
The fogging up on the camera lenses due to moisture presence inside the device is a common occurrence during winter water sports due to greater difference in external and internal temperatures.
Best Ways to Avoid or Eliminate Fog on GoPro Camera Lenses
The easiest solution to prevent GoPro fog deposition issues is to take out the moisture trapped inside the camera device. If there is no moisture residue inside, there will not be any chances of condensation problems. Following are some convenient options to eliminate fog from GoPro camera.
Use Anti-fog Inserts
The anti-fog inserts are reusable low cost drying agents with superb capacity to absorb water molecules. The commercial grade anti-fog inserts contain silica gel of very high quality with cellulose fiber. The gel packed in small sacks is often provided inside electronic goods to keep the moisture away. When you insert the silica bags inside the camera, it will readily soak the moisture. You can take out the bag and dry it naturally or in the microwave oven for future use.
Best recommendations:
1. GoPro Anti Fog Inserts - $15.39
A single pack of GoPro Anti Fog Insert contains 12 sacks of silica gel. Each sack is compatible for up to 4 uses. These sacks require regular drying after every use. You can apply 300-degree temperature heating in the oven for five minutes to complete the drying process. After using and drying, store the inserts in airtight container.
2. CamKix Anti-fog Inserts - $5.69
These inserts are affordable compared to the GoPro inserts in terms of price and product quantity. A single pack contains 20 sacks of silica gel inserts. The size of the sacks and product quality is compatible for using in all GoPro camera models. These reusable sacks can be dried in the oven at 300 degree Fahrenheit.
3. Wose Anti-fog inserts - $5.59
Comparing the price of all the three anti fog inserts, you will find Wose as the cheapest product in the market. You will get 24 pieces of silica gel sacks in a pack of Wose inserts. The sacks contain 3M adhesive material of extra strong industrial grade. These sacks are also compatible for multiple usages after drying in the oven as mentioned above.
DIY GoPro Anti-fog insert
The major drawback of using the GoPro anti-fog inserts is the cost factor. On average, the cost of a pack of 12 inserts is $15. The pack is sufficient for using 4 times. With a simple DIY method, you can save the dollars. Follow these simple steps to soak all the moisture in your camera.
Step 1: Take a thick paper towel and cut strips of 0.75”x3” dimension.
Step 2: Fold the strips in rectangular shape in a way that you can place them firmly inside the camera case.
Step 3: The size of your GoPro camera will depend on the version you possess. Place the folded paper towel pieces inside the case on the camera everywhere so that it absorbs moisture from all parts. You may need 3 to 6 paper pieces to soak the moisture completely.
Max Wales
Max Wales is a writer and a lover of all things video.
Follow @Max Wales
Also read:
- Husqvarna H501X4 FPV Quad Examination
- Eliminate Unwanted Podcast Suggestions on Spotify
- [Updated] Alight Motion Comprehensive Review
- [Updated] Cinematic Scale Optimizer
- 2024 Approved Cost Calculations for Your Dream Podcast Project
- Capturing the Horizon Expert Techniques in Drone Filmmaking
- [New] Building Powerful Relationships Through Strategic Social Media Engagement
- [Updated] Choreographing Gripping Podcast Openings
- 2024 Approved Budget-Friendly Action Cam Selections Affordable Options Under $100
- [Updated] Crafting Cinematic Memories with Music
- Blithe Clip Recorder Appraisal
- Harnessing Google Photos for Organized Memories
- The Definitive SRT File Generation Manual
- Sculptors of Immersive Digital Universes
- Synchronizing Realism Advanced Green Screen Applications for Viewers
- The Complete Guide for Capturing Stunning Details on Film
- In 2024, Chortle to Text Funniest Tone Websites Guide
- Shield Identities Blurring Techniques for Photos
- [New] Charting Your Course to Windows 11 Compliance
- Syncing Speakers with Slides A Handbook on Music Integration
- Action Camera Showdown SJ-CAM S6 Takes the Spotlight
- Leading Edges in Mobile Photography Best Phones for Clear Videos
- Editorial Efficiency M1's Smooth Performance Unveiled
- [Updated] Aerial Visual Flux Free LUTTs for DJI Drones, Then Pay Upgrade
- Final Cut Pro for Beginners The Definitive Starter Pack
- In 2024, Brightness and HD in Harmony A Fit for HDR?
- 2024 Approved A Stepwise Journey Through Windows 10 Recording
- DJI Drones Collection Entry Grade, Premium Pro, Elite 4K Flight
- Azure Speech-to-Text A Quick Overview for Developers
- Best 5 High-End Drones for Professionals for 2024
- Mastering Netflix's Split Screen Functionality
- [New] In 2024, 5 Best Webcams for Gaming
- Updated 2024 Approved Decoding the Quest for Ultimate Sound Engineering Mastery The Role of MAGIX Samplitude
- [Updated] SnapTweet Transporter Swiftly Grab Social Media Vids
- [New] In 2024, Pro Mac & PC Screen Capture Experts
- How To Fix iPhone 11 Pro Unavailable Issue With Ease
- [Updated] 2024 Approved Essential Knowledge Zooming Into Clustered Rooms
- [New] In 2024, Webcam Recorder Reviews - Unlocking Your Video Potential
- In 2024, All You Need To Know About Mega Greninja For Oppo A18 | Dr.fone
- How to Successfully Bypass iCloud Activation Lock from Apple iPhone 6s
- Integrating Siri Voice Techniques Into TikTok Sharing for 2024
- [Updated] Snap the Scene Comprehensive, No-Cost PC/Mac Capture Tools
- How to Transfer Data from Samsung Galaxy S24+ to Samsung Phone | Dr.fone
- [New] Boosting Zoom Clarity The Guide to Using Filters Wisely for 2024
- How do I reset my Tecno Spark Go (2023) Phone without technical knowledge? | Dr.fone
- [Updated] 2024 Approved A Practical Guide to Managing Twitter Archives
- Does Vivo G2 Have Find My Friends? | Dr.fone
- [Updated] 2024 Approved 8 Must-Have TikTok Tools to Boost Your Growth
- [New] Most Popular Firefox Screenshots & Recorders for 2024
- In 2024, How to Transfer/Sync Notes from Apple iPhone 6 to iPad | Dr.fone
- [New] Premier Live Recording Suite
- 2024 Approved Expertly Record Your Discord Sessions
- Title: "[New] Clearing Up Tips for Preventing GoPro Haze"
- Author: Daniel
- Created at : 2024-05-24 04:21:51
- Updated at : 2024-05-25 04:21:51
- Link: https://extra-resources.techidaily.com/new-clearing-up-tips-for-preventing-gopro-haze/
- License: This work is licensed under CC BY-NC-SA 4.0.